Two-way passive, full-range, low profile 4” ceiling speaker
- 4” coaxial driver
- Discreet size with shallow back can
- Unobtrusive design
- 8 ohm or 70/100V line operation
- Range of power taps
- Wide conical coverage pattern
- Integrated mounting hardware
Bars/Restaurants & Cafes
Houses of Worship
Up 4S is a discreet, two-way, passive 4” speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.
Up 4S features a 4” (105mm) low frequency driver paired with a 0.7” (20mm) silk dome tweeter. It is suitable for both high quality speech and music reproduction.
The wide 150° conical coverage of Up 4S makes it particularly suitable for low ceilings and reduces the number of speakers required for even coverage leading to a reduction in installation cost. A shallow steel back can allows installation in ceilings with minimal cavity depth. An integral fixing system is included to achieve a simple and clean installation. Up 4S has a steel back, perforated steel grille and finished in neutral white.
Each Up 4S can be run on a series of 70 or 100 Volt taps or at low impedance. Tap selection is via a rotary switch behind the removable grille.
A SmartAmp or powered Zone will provide amplification, optimal sound performance and loudspeaker protection via presets. When coupled with a Zone and WebApp, system set up and end user control is straight forward, and can be further supplemented by ZonePad wall controllers.
|TYPE||Two-way, full range, passive, ceiling speaker|
|FREQUENCY RESPONSE (with preset)||110Hz – 18kHz ± 3dB|
-10dB @ 85Hz
|DRIVERS||LF: 4” (105mm), Polypropylene injection moulded|
HF: 0.7″ (20mm) Silk Dome
|RATED POWER||15W (AES) 30W (Peak)|
|MAXIMUM SPL||98dB (cont), 101dB (peak)|
|RECOMMENDED HIGH-PASS FILTER||24dB/octave @ 85Hz|
|TRANSFORMER TAPS @ 70V||8,4,2,1,0.5W|
|TRANSFORMER TAPS @ 100V||8,4,2,1W|
|DISPERSION (-6dB)||150˚ conical|
|BACK CAN||Zinc-plated Steel|
|PROTECTIVE GRILLE||Perforated steel with cloth backing|
|CONNECTORS||4 Pin Euroblock with link out|
|FITTINGS||C-ring support backing plate|
|DIMENSIONS (inc. Grille)|
(Ø) 202mm x (D) 144mm
(Ø) 7.95” x (D) 5.67”
- 2 tile support rails (for 2 ft or 600 mm tile spans)
- cutout template
- paint shield
- removable locking multi-pin connector